Scenic Acoustic & Vibration Engineering Ltd TEL: +44(0)1229 871171
CBM - Thermal Imaging

Slight temperature variations across a surface can be discovered with visual inspection and non-destructive testing with thermography. Heat is indicative of failing components, especially degrading electrical contacts and terminations. Thermography can also be successfully applied to high-speed bearings, fluid couplings, conveyor rollers, and storage tank internal build-up. Wear Debris Analysis: Using a Scanning Electron Microscope of a carefully taken sample of debris suspended in lubricating oil (taken from filters or magnetic chip detectors). Instruments then reveal the elements contained, their proportions, size and morphology. Using this method, the site, the mechanical failure mechanism and the time to eventual failure may be determined. Wear Debris Detection Sensors are capable of detecting ferrous and non-ferrous wear particles within the lubrication oil giving considerable information about the condition of the measured machinery. By creating and monitoring a trend of what debris is being generated and at what rate, it is possible to detect faults prior to catastrophic failure of rotating equipment such as gearbox's, turbines, etc.
01229 871171

Condition Monitoring
Predictive Maintenance
Equipment Hire

Scenic Acoustic & Vibration Engineering Ltd, 41 Clarence Road, Barrow-in-Furness, Cumbria, England, UK. LA14 9RT
Tel: 01229 871171 Mobile 07855 253 458

(c)2019 Scenic Acoustic & Vibration Engineering Ltd